I have just installed BlueIris and was trying to configure Blueiris to work with the IPCC 7210W V2.
1st: The camera is not setup using Find/inpect with ONVIF enabled.
It will sometimes find Foscam F186xx/98xx compatible, or it will set to default, and the PTZ tab will be set to OXML and the PTZ Presets will not work. The Presets were set and confirmed working using the Cam's internal web server.
IPCC 7210W V2:
Software Version: V126.96.36.199.43-20151127
Webware Version: E-25.1.720.20
Results from Find/inspect
Opening port 80...
Opening port 8080...
Requesting device information...
2nd: I can manually set the camera to IPCC 720W/7205W/7210W V2 RTSP and set the PTZ/Control Tab to Network IP: IPCC-7210W V2 and the PTZ Presets still do not work.
The manual PTZ work just the presets.
3rd: There is no audio with any setting.
(122.98 KB, 6 views)
(108.19 KB, 7 views)
(97.88 KB, 6 views)
(3.97 KB, 18 views)